Independent guide. Not affiliated with any city, village, town or county.

permit.guide
Lee County, Florida

City of Bonita Springs fence permit

Do you need a fence permit in the City of Bonita Springs? Yes. The City of Bonita Springs requires a permit before you build a fence.

buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the City of Bonita Springs (site plan, aerial photo and filled-in details) in a few minutes. Start with your address.

Quick facts

Permit required
Yes source
Side and rear yards
6 ft source
Front (street) yard
3 ft between the street right-of-way/easement and the minimum street setback line (4 ft if open mesh and not blocking vehicle visibility) source
Distance from lot line
Not in a street right-of-way or easement; at least 5 ft from the mean high-water line of natural water bodies (landward of a seawall on seawalled canals). The City strongly recommends 6 inches from side and rear lines; all fence and post material must be on your property. source
Good side faces
Finished side faces the adjoining lot or abutting right-of-way (the City can waive this in writing where a fence or hedge already exists next door). source
Not allowed
Non-traditional materials (tires, mufflers, hubcaps); fabric, netting or plastic, metal or vinyl sheets added for privacy; barbed wire, spire tips, sharp objects, hog wire and electrically charged fences (with listed exceptions). source
How to apply
Email, in person source
Plan your fence and build the applicationLook up your address, draw the fence on an aerial photo of your lot, and get a site plan and filled-in application you can send to City of Bonita Springs.

How to file for a fence permit in the City of Bonita Springs

Steps based on cityofbonitaspringscd.org

  1. Complete a building permit application for the fence.
  2. Submit it in person at 9220 Bonita Beach Road, Suite 111, or by email to [email protected] if accepted for this permit type.
  3. Pay permit fees through the City's secure online portal.
  4. Submit a final survey and get it approved before scheduling the final inspection.
  5. Call Sunshine 811 at least two full business days before digging.
Paying
Through the City's secure online permit portal
Inspections
Final inspection after the final survey is approved

Who to contact

Permitting
City of Bonita Springs Community Development

Phone
(239) 444-6150
Email
[email protected]
Hours
Lobby 9 AM to 4 PM, Monday to Friday
Address
Community Development, 9220 Bonita Beach Road, Suite 111, Bonita Springs, FL 34135

Contact from cityofbonitaspringscd.org

What to submit

  • Building permit application
  • Final survey, approved before the final inspection is scheduled

Other rules to know

  • Fences and walls over 25 inches tall must go through building permit procedures.
  • Within 25 ft of a water body, the fence must be open mesh above 3-1/2 ft.

Before you dig

Call Sunshine 811 before digging post holes (dial 811 or file online at sunshine811.com) at least two full business days ahead. Find your lot corner markers and keep the fence on your side of the line. County parcel maps can be off by several feet; if you're not sure where the line is, a licensed land surveyor can stake it.

Frequently asked questions

Do I need a permit to build a fence in the City of Bonita Springs, FL?

Yes. The City of Bonita Springs requires a permit before you build a fence.

How tall can a fence be in the City of Bonita Springs?

Side and rear yards: 6 ft. Front (street) yard: 3 ft between the street right-of-way/easement and the minimum street setback line (4 ft if open mesh and not blocking vehicle visibility).

How close to the property line can I put a fence in the City of Bonita Springs?

Not in a street right-of-way or easement; at least 5 ft from the mean high-water line of natural water bodies (landward of a seawall on seawalled canals). The City strongly recommends 6 inches from side and rear lines; all fence and post material must be on your property.

Which side of the fence has to face the neighbor in the City of Bonita Springs?

Finished side faces the adjoining lot or abutting right-of-way (the City can waive this in writing where a fence or hedge already exists next door).

How do I apply for a fence permit in the City of Bonita Springs?

Complete a building permit application for the fence. Submit it in person at 9220 Bonita Beach Road, Suite 111, or by email to [email protected] if accepted for this permit type. Pay permit fees through the City's secure online portal. Submit a final survey and get it approved before scheduling the final inspection. Call Sunshine 811 at least two full business days before digging. buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the City of Bonita Springs (site plan, aerial photo and filled-in details) in a few minutes.

Who do I contact about a fence permit in the City of Bonita Springs?

Permitting, City of Bonita Springs Community Development. Phone (239) 444-6150, email [email protected].

Sources

Summarized from the City of Bonita Springs's own ordinances, forms and permit pages. Each link opens the original.

Ordinance: Bonita Springs LDC §4-1465 and §4-1467 (fences and walls)

  1. cityofbonitaspringscd.org
  2. zoneomics.com — Municipal code: chapter 6

Work for the City of Bonita Springs? Help us keep this right

If anything on this page is wrong or out of date, tell us and we'll fix it. Municipal staff reports are reviewed first. Please include a link to the current ordinance, form or fee schedule if you can.