Independent guide. Not affiliated with any city, village, town or county.

permit.guide
Palm Beach County, Florida

Village of Palm Springs fence permit

Do you need a fence permit in the Village of Palm Springs? Yes. The Village of Palm Springs requires a permit before you build a fence.

buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the Village of Palm Springs (site plan, aerial photo and filled-in details) in a few minutes. Start with your address.

Quick facts

Permit required
Yes source
Side and rear yards
6 ft source
Front (street) yard
4 ft on the front property line and side line up to the front building setback line (measured from the street centerline grade) source
Corner lots
3 ft within the 30 ft visibility triangle source
Good side faces
Finished side of all fences must face the street or the adjoining property. source
Not allowed
Broken glass, spikes, nails, electric shock elements, barbed wire, or anything designed to inflict pain or injury. source
How to apply
Online portal source
Plan your fence and build the applicationLook up your address, draw the fence on an aerial photo of your lot, and get a site plan and filled-in application.

How to file for a fence permit in the Village of Palm Springs

  1. Fill out the Village's Zoning-and-Driveway application (Forms & Applications) for fence approval.
  2. Submit through the Village's online permit portal (no new submittals after 2 p.m.).
  3. Keep the fence 4 ft in front, 6 ft on side and rear lines, finished side out, with hedge screening along any right-of-way.
  4. Call Sunshine 811 at least two full business days before digging.

Who to contact

Planning, Zoning & Building

Phone
561-584-8280
Email
[email protected]
Hours
Mon–Fri 8 a.m.–3 p.m.
Address
226 Cypress Lane, Palm Springs, FL 33461

Contact from vpsfl.org — Planning Zoning Building

Other rules to know

  • Village Code Sec. 34-883(1): fences and walls must comply with the permit procedures of the Village building code. The Village posts a Zoning-and-Driveway application for fence approval.
  • A fence or wall next to a right-of-way must be screened on the street side with hedge plants (3-gallon, 2 ft on center, 36 inches at planting). Hedges along collector/arterial roads may reach 10 ft.

Before you dig

Call Sunshine 811 before digging post holes (dial 811 or file online at sunshine811.com) at least two full business days ahead. Find your lot corner markers and keep the fence on your side of the line. County parcel maps can be off by several feet; if you're not sure where the line is, a licensed land surveyor can stake it.

Frequently asked questions

Do I need a permit to build a fence in the Village of Palm Springs, FL?

Yes. The Village of Palm Springs requires a permit before you build a fence.

How tall can a fence be in the Village of Palm Springs?

Side and rear yards: 6 ft. Front (street) yard: 4 ft on the front property line and side line up to the front building setback line (measured from the street centerline grade). Corner lots: 3 ft within the 30 ft visibility triangle.

Which side of the fence has to face the neighbor in the Village of Palm Springs?

Finished side of all fences must face the street or the adjoining property.

How do I apply for a fence permit in the Village of Palm Springs?

Fill out the Village's Zoning-and-Driveway application (Forms & Applications) for fence approval. Submit through the Village's online permit portal (no new submittals after 2 p.m.). Keep the fence 4 ft in front, 6 ft on side and rear lines, finished side out, with hedge screening along any right-of-way. Call Sunshine 811 at least two full business days before digging. buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the Village of Palm Springs (site plan, aerial photo and filled-in details) in a few minutes.

Who do I contact about a fence permit in the Village of Palm Springs?

Planning, Zoning & Building. Phone 561-584-8280, email [email protected].

Sources

Summarized from the Village of Palm Springs's own ordinances, forms and permit pages. Each link opens the original.

Ordinance: Palm Springs Code Sec. 34-883 Fences, walls and hedges

  1. zoneomics.com — Municipal code: chapter 7
  2. vpsfl.org — Planning Zoning Building

Work for the Village of Palm Springs? Help us keep this right

If anything on this page is wrong or out of date, tell us and we'll fix it. Municipal staff reports are reviewed first. Please include a link to the current ordinance, form or fee schedule if you can.