Independent guide. Not affiliated with any city, village, town or county.

permit.guide
Grayson County, Texas

City of Sherman fence permit

Do you need a fence permit in the City of Sherman? Yes. The City of Sherman requires a permit before you build a fence.

buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the City of Sherman (site plan, aerial photo and filled-in details) in a few minutes. Start with your address.

Quick facts

Permit required
Yes source
Side and rear yards
8 ft (solid, no openings) source
Front (street) yard
4 ft in a front yard (residential district); front-yard fences must be decorative with openings in at least half the fence area source
Corner lots
Nothing in the 25 ft sight triangle at street intersections (10 ft at street-alley intersections) source
Distance from lot line
No fence or screening device within the sight triangles: 25 ft from the intersection of street right-of-way lines, 10 ft at street-alley intersections. Variances by the Director of Engineering. source
Not allowed
Metal panel fences are not permitted in any district. Chain link, woven wire mesh and similar materials are prohibited in residential and non-residential front yards. Barbed wire along or adjoining public streets, alleys or grounds is unlawful (Director of Development Services may approve exceptions). Electric fences prohibited along public streets, alleys and common property lines (agricultural exceptions with Director approval). source
How to apply
Call 903-892-7229 source

Still being confirmed with Sherman: What is the current fence permit fee, and is there a fence-specific application or checklist?

Plan your fence and build the applicationLook up your address, draw the fence on an aerial photo of your lot, and get a site plan and filled-in application you can send to City of Sherman.

How to file for a fence permit in the City of Sherman

Steps based on cityofsherman.com — Building Permits Inspections

  1. Contact Development Services (903-892-7229 or [email protected]) to confirm what to submit for a fence permit.
  2. Apply for the building permit (the City's Building Permits & Inspections page says permits are applied for through its online Self Service Portal).
  3. Have the fence inspected by the City.
  4. Call 811 before digging.

Who to contact

Development Services - Building Permits & Inspections
Building Official: Larry Bollier

Phone
903-892-7229
Email
[email protected]
Hours
Monday-Friday 8 a.m.-5 p.m.
Address
Development Services, 317 S Travis St., Sherman, TX 75090

Contact from cityofsherman.com — Building Permits Inspections

What to submit

  • Building permit application (apply online through the City's Self Service Portal, or call Development Services)

Other rules to know

  • Sec. 14.04.004 states fences and screening devices must have a building permit and be inspected by the City.
  • Sec. 14.04.004 does not list a finished-side requirement.
  • Fee amount not found on the pages read; the Building Permits & Inspections page links a Fee Schedule.

Before you dig

Call 811 before digging post holes so underground utility lines are marked. Find your lot corner markers and keep the fence on your side of the line. Find your lot corner markers and keep the fence on your side of the line. County parcel maps can be off by several feet; if you're not sure where the line is, a licensed land surveyor can stake it.

Frequently asked questions

Do I need a permit to build a fence in the City of Sherman, TX?

Yes. The City of Sherman requires a permit before you build a fence.

How tall can a fence be in the City of Sherman?

Side and rear yards: 8 ft (solid, no openings). Front (street) yard: 4 ft in a front yard (residential district); front-yard fences must be decorative with openings in at least half the fence area. Corner lots: Nothing in the 25 ft sight triangle at street intersections (10 ft at street-alley intersections).

How close to the property line can I put a fence in the City of Sherman?

No fence or screening device within the sight triangles: 25 ft from the intersection of street right-of-way lines, 10 ft at street-alley intersections. Variances by the Director of Engineering.

How do I apply for a fence permit in the City of Sherman?

Contact Development Services (903-892-7229 or [email protected]) to confirm what to submit for a fence permit. Apply for the building permit (the City's Building Permits & Inspections page says permits are applied for through its online Self Service Portal). Have the fence inspected by the City. Call 811 before digging. buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for the City of Sherman (site plan, aerial photo and filled-in details) in a few minutes.

Who do I contact about a fence permit in the City of Sherman?

Development Services - Building Permits & Inspections, Building Official: Larry Bollier. Phone 903-892-7229, email [email protected].

Sources

Summarized from the City of Sherman's own ordinances, forms and permit pages. Each link opens the original.

Ordinance: Zoning Ordinance (Chapter 14) Sec. 14.04.004 Fences and Screening Devices

  1. cityofsherman.com — Building Permits Inspections
  2. cityofsherman.com — FINAL Chapter 14 Zoning Ordinance 2022 FINAL ADOPTED 12 5 2022

Work for the City of Sherman? Help us keep this right

If anything on this page is wrong or out of date, tell us and we'll fix it. Municipal staff reports are reviewed first. Please include a link to the current ordinance, form or fee schedule if you can.