Independent guide. Not affiliated with any city, village, town or county.

permit.guide
Utah County, Utah

Elk Ridge City fence rules

Do you need a fence permit in the Elk Ridge City? No. Elk Ridge City does not require a permit for a typical residential fence, but height and placement rules still apply.

At buildit.dog you can draw your fence on an aerial photo of your lot and check it against Elk Ridge City's rules before you build. Start with your address.

Quick facts

Permit required
No (typical residential fence) source
Side and rear yards
8 ft source
Front (street) yard
36 in (no fence in the front setback) source
Corner lots
Sight-obscuring fences over 36 in may not extend into the front setback or clear vision area source
How to apply
In person source

Still being confirmed with Elk Ridge City: Does a fence 7 ft or shorter need any City approval?

Plan your fence and build the applicationLook up your address, draw the fence on an aerial photo of your lot, and get a site plan and filled-in application.

How to build within the rules in the Elk Ridge City

Steps based on codelibrary.amlegal.com — Municipal code: 0 0 0 4790

  1. Keep the fence out of the front setback and clear vision area; get a building permit if it will be over 7 ft.
  2. Call 811 before digging.

Who to contact

Phone
801-423-2300
Hours
Mon-Thu 9 a.m.-4 p.m., Fri 9 a.m.-1 p.m.
Address
80 E Park Dr., Elk Ridge, UT 84651

Contact from elkridgeutah.gov — permits

Other rules to know

  • A building permit is needed for fences over 7 ft; fences over 8 ft may need an engineer's sign-off.

Before you dig

Call 811 before digging post holes so underground utility lines are marked. Find your lot corner markers and keep the fence on your side of the line. Find your lot corner markers and keep the fence on your side of the line. County parcel maps can be off by several feet; if you're not sure where the line is, a licensed land surveyor can stake it.

Frequently asked questions

Do I need a permit to build a fence in the Elk Ridge City, UT?

No. Elk Ridge City does not require a permit for a typical residential fence, but height and placement rules still apply. A building permit is needed for fences over 7 ft; fences over 8 ft may need an engineer's sign-off.

How tall can a fence be in the Elk Ridge City?

Side and rear yards: 8 ft. Front (street) yard: 36 in (no fence in the front setback). Corner lots: Sight-obscuring fences over 36 in may not extend into the front setback or clear vision area.

Who do I contact about a fence permit in the Elk Ridge City?

City staff. Phone 801-423-2300.

Sources

Summarized from Elk Ridge City's own ordinances, forms and permit pages. Each link opens the original.

Ordinance: Elk Ridge Code 10-12-13

  1. codelibrary.amlegal.com — Municipal code: 0 0 0 4790
  2. elkridgeutah.gov — permits

Work for Elk Ridge City? Help us keep this right

If anything on this page is wrong or out of date, tell us and we'll fix it. Municipal staff reports are reviewed first. Please include a link to the current ordinance, form or fee schedule if you can.