Independent guide. Not affiliated with any city, village, town or county.

permit.guide
St. Croix County, Wisconsin

St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy) fence permit

Do you need a fence permit in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)? Not confirmed. Contact St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy) before you build; the rules below are what we found in the ordinance.

buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy) (site plan, aerial photo and filled-in details) in a few minutes. Start with your address.

Quick facts

Permit required
Not confirmed source
Side and rear yards
Same: privacy fence max 8 ft; open fence max 12 ft source
Front (street) yard
Privacy fence (at least 50% opaque, 4-8 ft tall): max 8 ft. Open fence (under 50% opaque): max 12 ft. The county code does not set separate heights by yard. source
Corner lots
No privacy fences in a vision triangle; no fence or object blocking line of sight there source
Distance from lot line
Fences and walls may be located in any required setback area, but privacy fences must meet road setbacks. Open fences may go up to the highway right-of-way only if the Land Use Administrator and County Highway Dept find the line of sight is not impaired. source
Good side faces
Finished side faces outward toward the public right-of-way and/or adjacent parcel. source
How to apply
Call 715-386-4680 source

Still being confirmed with St. Croix County General Zoning: Does a residential fence in a county-zoned town need a Land Use Permit, and what is the fee?

Plan your fence and build the applicationLook up your address, draw the fence on an aerial photo of your lot, and get a site plan and filled-in application you can send to St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy).

How to file for a fence permit in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)

  1. Call or email the Community Development Department (715-386-4680, [email protected]) to ask whether your fence needs a Land Use Permit; the zoning chapter does not say.
  2. If told you need one, use the County Land Use Permit Application with a site plan showing property lines and setbacks.
  3. Check with your town for any other permits before building.
  4. Call Diggers Hotline (811) at least 3 business days before digging.
Paying
Application fee per county fee schedule; nonrefundable
Review time
Decision within 60 days of a complete application
Inspections
Site visit; flag property and project corners
Permit good for
2 years

Who to contact

Community Development Department (Land Use and Zoning)
County zoning staff

Phone
715-386-4680
Email
[email protected]
Hours
Mon-Fri 8:00 AM-4:30 PM
Address
St. Croix County Government Center, 1101 Carmichael Rd, Suite 1300, Hudson, WI 54016

Contact from sccwi.gov — zoning

What to submit

  • Land Use Permit Application
  • Site plan showing property boundaries, setbacks and structure locations

Other rules to know

  • Fences are listed as accessory structures in the county zoning definitions (Sec. 15.805); the excerpts read did not show whether a fence needs a Land Use Permit.
  • Land Use Permit fee is set in the county Community Development fee schedule (the schedule linked from the zoning page is labeled 2019).
  • Applications due the first Monday of the month per the zoning page; a decision is expected within 60 days of a complete application; an approved permit is valid two years.
  • Fence along a road right-of-way needs adequate parking space between a gate and the roadway (Sec. 15.340(5)).

Before you dig

Call Diggers Hotline at 811 (or file online at diggershotline.com) at least 3 business days before digging post holes. Find your lot corner markers and keep the fence on your side of the line. County parcel maps can be off by several feet; if you're not sure where the line is, a licensed land surveyor can stake it.

Frequently asked questions

Do I need a permit to build a fence in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy), WI?

Not confirmed. Contact St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy) before you build; the rules below are what we found in the ordinance.

How tall can a fence be in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)?

Side and rear yards: Same: privacy fence max 8 ft; open fence max 12 ft. Front (street) yard: Privacy fence (at least 50% opaque, 4-8 ft tall): max 8 ft. Open fence (under 50% opaque): max 12 ft. The county code does not set separate heights by yard.. Corner lots: No privacy fences in a vision triangle; no fence or object blocking line of sight there.

How close to the property line can I put a fence in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)?

Fences and walls may be located in any required setback area, but privacy fences must meet road setbacks. Open fences may go up to the highway right-of-way only if the Land Use Administrator and County Highway Dept find the line of sight is not impaired.

Which side of the fence has to face the neighbor in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)?

Finished side faces outward toward the public right-of-way and/or adjacent parcel.

How do I apply for a fence permit in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)?

Call or email the Community Development Department (715-386-4680, [email protected]) to ask whether your fence needs a Land Use Permit; the zoning chapter does not say. If told you need one, use the County Land Use Permit Application with a site plan showing property lines and setbacks. Check with your town for any other permits before building. Call Diggers Hotline (811) at least 3 business days before digging. buildit.dog can turn a fence drawn on an aerial photo of your lot into a complete permit application package for St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy) (site plan, aerial photo and filled-in details) in a few minutes.

Who do I contact about a fence permit in the St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)?

Community Development Department (Land Use and Zoning), County zoning staff. Phone 715-386-4680, email [email protected].

Sources

Summarized from St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)'s own ordinances, forms and permit pages. Each link opens the original.

Ordinance: County Zoning Ordinance Ch. 15, Sec. 15.340 Fences and Walls

  1. sccwi.gov — Chapter 15 PDF Zoning
  2. sccwi.gov — Faq
  3. sccwi.gov — zoning
  4. sccwi.gov — Land Use Permit Application PDF

Work for St. Croix County General Zoning (all towns except Forest, Hudson, St. Joseph, Troy)? Help us keep this right

If anything on this page is wrong or out of date, tell us and we'll fix it. Municipal staff reports are reviewed first. Please include a link to the current ordinance, form or fee schedule if you can.